This project consisted of a new 130,000 square foot patient tower located on the main campus. A new main entrance to the hospital was also incorporated into this addition.
This addition has stand‐alone Mechanical systems including the following:
- (4) Custom Air Handling Units – Total CFM 140,000
- (2) 400‐ton Air-Cooled Chillers
- (3) 168 Horsepower Condensing Dual Fuel Boilers
- (212) Variable Air Volume Terminal Units with Hot Water Coils
- (1) 10,000-Gallon Underground Fuel Oil Tank
- New Medical Air, Vacuum, and Bulk Oxygen systems
RHMC was brought in at the inception of the project on a design-assist basis to work with the project team. We worked with the electrical subcontractor to develop multi‐trade patient room racks that house the reheat, medical gasses, and power conduits. We also prefabricated all of the headwall services together in a similar fashion.
Key Project Elements:
- Design-Assist
- Total Station Hanger and System layout
- Coordination
- 100% Revit Prefabrication
- Duct: Supply, Return, Exhaust, Grease Duct, Isolation Duct, Fume Hoods, VAV & Air Valves, Underground Duct
- Mechanical Piping: HHW, CHW, Ref, G, Fuel Oil, Steam, Underground Natural Gas and Fuel Oil
- Medical Gas: MG,MA;O2,Vac, Underground O2
- Prefabrication: Headwalls, Zone Valve Boxes, Flat Piping Racks
- Multi-Trade Patient Room Racks
- Air Handling Units, Roof Top Air Handlers, Air-Cooled Chillers, Pumps, Exhaust Fans, Humidifiers, VAV with Reheat Coils, VAV with Electrical Reheat, Air Curtains, Fan Terminal Units, Boilers, Medical Gas Zone Valve Boxes and Outlets, Medical Area Alarms, Vacuum Pumps, Medical Air Compressors, and Medical Gas Manifolds
